MécaTech NCH Oil Flush

A safe engine flush for completely cleaning an engine oil system

MécaTech NCH Oil Flush is a cleaner with a unique composition that effectively and safely cleans the entire engine oil system without using solvents. This makes the product safe for your engine and seals.

MécaTech NCH Oil Flush solves problems caused by contamination and ensures that the properties of new oil are used to the maximum. Clean oil in a clean engine block.

MécaTech NCH Oil Flush has the properties to safely clean the engine while you drive, so that all components in your engine that come into contact with the engine oil are intensively cleaned. This has the advantage that systems (e.g. variable camshaft timing) are cleaned better compared to cleaners that only clean when stationary and at increased speed. Add the product to the old engine oil 300-500 km before the oil change and clean the engine's oil system while you drive. Clean your engine safely with today's knowledge.

WHAT ARE THE UNIQUE BENEFITS OF MÉCATECH NCH OIL FLUSH?

- It can be driven without restrictions
- Contains no solvents, so safe for oil seals, rubbers and gaskets in the engine
- Suitable for engines with a wet timing belt
- Suitable for use at high speeds

WHAT ARE THE BENEFITS OF MÉCATECH NCH OIL FLUSH?

- Removes paint deposits, black and white sludge
- Intensively cleans valve lifters and chain tensioners, restores function
- Stabilizes compression end pressure
- Optimizes oil pump operation and oil pressure
- Neutralizes acid and combustion residues

HOW DO I USE MÉCATECH NCH OIL FLUSH?

MAINTENANCE AND LIGHT TO MODERATE DIRECTIONS
- Add MécaTech NCH Oil Flush to the old engine oil. 1 dose of 300 ml is sufficient for up to 6 litres of crankcase capacity.
- Let the engine run at high speed (1,500-2,000 rpm) for 30 minutes, or make a test drive of at least 15 minutes. Treatment time/test drive may be (greatly) exceeded for better cleaning.
- Drain the oil when warm, replace the oil filter and use the prescribed oil.

HEAVY POLLUTION
- Visual inspection, In case of extreme contamination; disassemble valve cover, timing cover and oil pan and clean manually. This also gives the opportunity to check parts for wear and/or damage before cleaning.
- Assess oil filter. Replace filter if (imminently) clogged.
- Add 1x MécaTech NCH Oil Flush (per 6 litres of oil) to the old engine oil. Drive at least 300 km before changing the oil.
- Practical tip; If possible, clean the lubrication system before repairs. Do not install new parts in a dirty system!

For faster cleaning, you can combine the MécaTech NCH Oil Flush with the MécaTech Flush Accelerator .

Don't forget new oil can be ordered with it!

PRODUCT INFORMATION MÉCATECH NCH OIL FLUSH

- Contains no solvents, so safe to use for seals and oil seals
- Also safe to use for timing belts in an oil bath
- Does not affect the viscosity and lubricating properties of the oil present
- Suitable for every combustion engine; diesel, petrol, LPG, CNG
- Compatible with any mineral and synthetic motor oil
- Can be safely used on motorcycles with wet clutches
- Dissolves paint deposits, (black and white) sludge and thickened engine oil and removes other unwanted deposits
- Has a positive effect on the operation of piston rings, timing chain tensioning systems, hydraulic valve lifters, camshaft and valve lift adjustments
- Neutralizes acid
- In a clean system all components and the new engine oil are able to function better and this has a positive effect on oil consumption, reliability, service life, engine power and fuel consumption

CONTENTS

MécaTech NCH Oil Flush comes in a 300ml bottle